Loxa CNC Stone Diamond Tools: Comprehensive Series Guide (DSZ, CP, FP, FZ & CZ) for High-Precision Granite & Marble Routers
In India’s major stone-carving and processing clusters—spanning Kishangarh, Makrana, Hosur, Karimnagar, and Ahmedabad—the profitability of a stone CNC router unit depends on one factor: tool life vs. cutting speed. Using generic, unbranded diamond bits on dense South Indian granite or delicate Makrana white marble leads to disastrous tool whip, broken shanks inside expensive ER collets, and scrapped slabs.
Manufactured by Zhejiang Longxiang Tools Technology (LOXA 龙翔) and widely utilized across Indian stone machinery workshops, Loxa CNC Stone Diamond Tools have earned an industry-wide reputation for high diamond concentration, laser-straight tool balance, and specialized bonding chemistries.
Whether executing 3D temple deity statues, deep relief jali cutting, kitchen countertop sink profiling, or tombstone V-carving, Loxa categorizes its CNC diamond tooling into five distinct series: DSZ, CP, FP/FPC, FZ, and CZ.
In this technical guide, the Toolspana engineering team provides a complete breakdown of each Loxa tooling series, decoding model numbers, stone compatibility, spindle RPM limits, and shop-floor operating parameters.
Master Series Matrix: Loxa CNC Stone Tools Decoded
| Series Code | Tool Profile & Bonding Technology | Flute / Coating Finish | Shank Range (SD) | Primary Stone Applications |
|---|---|---|---|---|
| DSZ Series | Patented Composite Brazed Conical Tool (复合钎焊刀) | Signature Blue Spiral Flutes | 10mm, 12mm, 16mm (Lengths up to 230mm) | Deep 3D granite relief, temple pillars, deep statue carving |
| CP Series | Cylindrical Vacuum Brazed End Mill (平底圆柱型) | High-Exposure Gold/Silver Brazed Grit | 6mm, 8mm, 10mm, 12mm, 16mm | Fast slotting, kitchen sink cutouts, marble & quartz profiling |
| FP / FPC Series | Heavy-Duty Sintered Flat End Mill (耐磨型平底刀) | Sintered Cobalt-Bronze Metal Matrix | 6mm, 8mm, 12mm (With Central Water Slot) | High-wear granite roughing, pocket clearing, slab bed leveling |
| FZ Series | Heavy-Duty Sintered Tapered Ball Nose (耐磨型锥度球头) | Solid Sintered Diamond Conical Tip | 8mm, 12mm (Lengths up to 120mm) | Continuous 3D curved surfacing and roughing on hard granite |
| CZ Series | Tapered Vacuum Brazed Conical Tool (锥度尖头钎焊) | Coarse Brazed Diamond Grit | 6mm (Lengths up to 120mm) | Rapid 3D relief carving, jali cutting, lettering on marble & sandstone |
1. LOXA DSZ Series: Patented Blue Composite Brazed Conical Cutters
The DSZ Series (专利-复合钎焊刀) is Loxa’s flagship heavy-duty carving tool, instantly recognizable by its vibrant blue ceramic-protective coat and aggressive spiral diamond flutes.
Why the DSZ Series Leads the Industry:
- Spiral Chip Evacuation Flutes: Standard straight tools pack stone slurry into the cutting groove, creating extreme friction that burns diamond crystals. The DSZ spiral geometry pumps out water-saturated stone slurry rapidly, preventing bit clogging.
- Extended Reaches (Up to 230mm): The DSZ line features long-neck options (such as the massive
DSZ16,4-120(230)) designed for deep 3D carving of Hindu temple idols, elephant pillars, and monumental stone murals where standard short bits cannot reach without spindle collet collision.
Complete DSZ Series Size Chart:
| Model Number | Shank Dia (SD) | Tip Dia (TD) | Cutting Length (CL) | Total Length (TL) | Best Suited Applications |
|---|---|---|---|---|---|
| DSZ10,4-30(90) | 10 mm | 4.0 mm | 30 mm | 90 mm | Shallow 3D relief, border frames, lettering |
| DSZ10,4-30(120) | 10 mm | 4.0 mm | 30 mm | 120 mm | Medium-depth 3D panel carving, nameplates |
| DSZ10,3-60(120) | 10 mm | 3.0 mm | 60 mm | 120 mm | Fine detail 3D carving with high reach |
| DSZ10,3-60(160) | 10 mm | 3.0 mm | 60 mm | 160 mm | Deep relief carving on granite & marble |
| DSZ10,3-60(180) | 10 mm | 3.0 mm | 60 mm | 180 mm | Deep recessed temple wall panels |
| DSZ10,4-60(120 / 160 / 180) | 10 mm | 4.0 mm | 60 mm | 120 / 160 / 180 mm | General purpose medium-deep 3D relief |
| DSZ12,4-60(120 / 160 / 180) | 12 mm | 4.0 mm | 60 mm | 120 / 160 / 180 mm | High-rigidity 3D carving (reduces chatter) |
| DSZ12,6-60(120 / 160 / 180) | 12 mm | 6.0 mm | 60 mm | 120 / 160 / 180 mm | Heavy roughing and rapid 3D mass removal |
| DSZ16,4-120(180 / 230) | 16 mm | 4.0 mm | 120 mm | 180 / 230 mm | Extra-deep statue carving & architectural columns |
2. LOXA CP Series: Vacuum Brazed Cylindrical End Mills
The CP Series features a flat cylindrical cutting profile with 100% exposed diamond grit bonded under high-temperature vacuum furnaces.
Key Performance Advantages:
- Unbeatable Feed Rates in Marble & Limestone: Because the diamond grit is directly exposed, the CP series shears through soft to medium stones with almost zero spindle load.
- Stepped Cutting Diameter Options: Notice models like
CP10,11-20(160)orCP12,13-20(160)—the cutting head is intentionally engineered 1mm wider than the tool shank (11mm head on 10mm shank, or 13mm head on 12mm shank). This provides crucial sidewall clearance during deep slotting, preventing the tool body from rubbing against stone walls.
Complete CP Series Size Chart:
| Model Number | Shank Dia (SD) | Cutting Head Dia (CD) | Cutting Length (CL) | Total Length (TL) | Primary Usage |
|---|---|---|---|---|---|
| CP6-20(90 / 120) | 6 mm | 6.0 mm | 20 mm | 90 / 120 mm | Thin slab cutting, narrow grooving |
| CP8-20(90 / 120) | 8 mm | 8.0 mm | 20 mm | 90 / 120 mm | Kitchen sink cutouts, drainage channels |
| CP10,11-20(120 / 160 / 180) | 10 mm | 11.0 mm | 20 mm | 120 / 160 / 180 mm | Deep countertop profiling, thick slab slotting |
| CP12,13-20(120 / 160 / 180) | 12 mm | 13.0 mm | 20 mm | 120 / 160 / 180 mm | High-speed granite basin cutting, roughing |
| CP16,17-20(120 / 180) | 16 mm | 17.0 mm | 20 mm | 120 / 180 mm | Heavy industrial stone slab routing & trimming |
3. LOXA FP & FPC Series: Wear-Resistant Sintered Flat End Mills
The FP Series (耐磨型) is engineered for the most abrasive natural stones. Unlike brazed tools with a single diamond layer, the FP series is a solid sintered cylinder of synthetic industrial diamond crystals mixed with cobalt-bronze alloy.
Where to Use FP vs. FPC:
- FP Series: Continuous metal matrix self-sharpens as it cuts. When cutting hard granite like Black Galaxy or Jhansi Red, the matrix slowly erodes to expose fresh, razor-sharp diamond facets.
- FPC Series (Central Coolant Slot): Features an engineered vertical coolant slot directly across the face of the tool (
FPC12-20(120)). This allows flood water to enter the center of the cut directly, flushing away compacted granite slurry and preventing thermal core binding.
FP / FPC Size Chart:
| Model Number | Shank Dia (SD) | Cutting Dia (CD) | Cutting Length (CL) | Total Length (TL) | Material Specialization |
|---|---|---|---|---|---|
| FP6-20(90 / 120) | 6 mm | 6 mm | 20 mm | 90 / 120 mm | Granite engraving, pocket slotting |
| FP8-20(90 / 120) | 8 mm | 8 mm | 20 mm | 90 / 120 mm | Sink drop-in grooves, drainboards |
| FP12-20(120 / 160 / 180) | 12 mm | 12 mm | 20 mm | 120 / 160 / 180 mm | Heavy granite roughing, slab sizing |
| FPC12-20(120) | 12 mm | 12 mm | 20 mm | 120 mm | Center-coolant slotted cutter for dense granite |
4. LOXA FZ Series: Sintered Wear-Resistant Tapered Ball Nose
The FZ Series (耐磨型锥度球头) combines the self-sharpening endurance of the sintered metal matrix with a tapered conical body ending in a hemispherical ball nose tip.
Advantages of the FZ Tapered Shank:
A straight 3mm or 4mm tool flexing under heavy lateral cutting pressure in granite will snap. The FZ series utilizes a thick 8mm or 12mm rigid shank that tapers down to a 3mm, 4mm, or 6mm ball tip. This massive taper increases structural beam strength by over 400%, allowing aggressive 3D roughing passes in hard quartz-dense stone.
FZ Series Size Chart:
| Model Number | Shank Dia (SD) | Ball Tip Dia (TD) | Cutting Length (CL) | Total Length (TL) | Recommended 3D Use |
|---|---|---|---|---|---|
| FZ8,3-25(120) | 8 mm | 3.0 mm | 25 mm | 120 mm | Fine detail 3D carving on hard granite |
| FZ8,4-25(120) | 8 mm | 4.0 mm | 25 mm | 120 mm | Medium relief roughing and contouring |
| FZ12,4-25(120) | 12 mm | 4.0 mm | 25 mm | 120 mm | Heavy-duty vibration-free granite carving |
| FZ12,6-25(120) | 12 mm | 6.0 mm | 25 mm | 120 mm | High-volume 3D background clearing |
5. LOXA CZ Series: Vacuum Brazed Tapered Conical Cutters
The CZ Series features coarse vacuum-brazed diamond grit applied to a conical tapered profile.
Best Used For:
- Rapid Jali & Fretwork Piercing: In sandstone and marble, the CZ series cuts aggressively through 20mm–40mm slabs to produce intricate Islamic and Rajasthani jali screens with sharp internal corners.
- High-Speed Lettering: Ideal for deep V-grooved Hindi, English, and Arabic script carving in marble memorial plaques.
CZ Series Size Chart:
| Model Number | Shank Dia (SD) | Tip Dia (TD) | Cutting Length (CL) | Total Length (TL) | Primary Usage |
|---|---|---|---|---|---|
| CZ6,2-25(90) | 6 mm | 2.0 mm | 25 mm | 90 mm | High-precision thin line lettering & fine corners |
| CZ6,3-25(90) | 6 mm | 3.0 mm | 25 mm | 90 mm | Standard 3D relief roughing in marble |
| CZ6,3-25(120) | 6 mm | 3.0 mm | 25 mm | 120 mm | Deep reach jali cutting in 30mm–40mm stone |
Essential Factory Operating Guidelines (Direct from LOXA Engineering)
Every genuine Loxa tool package carries strict operational mandates stamped directly on its factory seal:
1. The 18,000 RPM Maximum Speed Rule (必须将转速控制在 18000 以下)
- Never exceed 18,000 RPM when running tools with total lengths of 120mm, 160mm, 180mm, or 230mm.
- Why? High rotational speeds on long-overhang tools create harmonic resonant frequencies. Running a 160mm or 180mm tool at 24,000 RPM will cause dynamic tool whip (centrifugal bending), resulting in violent bit snapping and severe operator hazard.
- Recommended Speeds: For tools
2. Spindle Concentricity & Collet Clamping Check (装夹同心度误差)
- Because Loxa long-reach tools project 80mm to 150mm out of the spindle, any microscopic runout in your ER25, ER32, or ER40 collet is multiplied at the tool tip.
- Factory Rule: After locking the tool into your collet nut, rotate the spindle by hand and inspect the tip runout. If visible wobble exceeds 0.015mm, re-seat the collet immediately.
Stone-Wise Tooling Selection Matrix
| Stone Material | Recommended Primary Roughing Tool | Recommended 3D Finishing Tool | Coolant Strategy |
|---|---|---|---|
| Black Galaxy & Jhansi Red Granite | LOXA FP / FPC Sintered End Mill | LOXA DSZ Blue or FZ Sintered Ball Nose | Heavy continuous flood water (Never dry) |
| White Makrana & Katni Marble | LOXA CP Vacuum Brazed End Mill | LOXA CZ Conical or DSZ Blue Spiral | Medium flood water (prevents edge blowout) |
| Dholpur & Teakwood Sandstone | LOXA CP Vacuum Brazed End Mill | LOXA CZ Conical Brazed Cutter | High-flow water (washes abrasive sand grit) |
| Engineered Quartz Countertops | LOXA CP Stepped End Mill (12,13-20) | LOXA DSZ Blue Conical Cutter | Cold water mist / flood stream |
(Need chip-free diamond saw blades for pre-sizing your stone slabs before loading them onto the CNC bed? Check our review of the Powertuff 4-Inch Diamond Saw Blade).
5 Practical Tips to Prevent Tool Breakage on Stone CNC Routers
- Adopt Helical Ramping (No Straight Plunging): In your CAM software (ArtCAM, Aspire, or PowerMill), never program straight vertical plunging (
- Stepdown Increments for Hard Granite: For 10mm and 12mm DSZ cutters in granite, maintain a depth of cut per pass of 0.5 mm to 1.2 mm. Taking overly aggressive 3mm passes will flex the shank and cause premature diamond shearing.
- Keep ER Collet Nut Clean: Wipe out hardened stone slurry from the ER collet slots every time you change bits. Use dedicated hook spanners to tighten. (Check our guide on Complete Spanner Sizing Chart to ensure proper clamping torque).
- De-Glaze Sintered Bits Regularly: When FP or FZ sintered bits feel dull, make 3 passes through a block of soft abrasive red brick or sandstone to expose a fresh layer of diamond crystals.
- Protect Tool Shanks from Rust: Store your Loxa tools inside their sealed zip pouches or organize them inside a modular storage case like the Bosch LS-BOXX 306 Toolbox.
Why Buy Genuine LOXA CNC Tools from Toolspana?
- 100% Genuine LOXA Guarantee: Direct factory-authorized import with authentic anti-counterfeit scratch-off verification codes and genuine factory batch labels on every pack.
- Rajasthan Stock Availability: Shipped straight from our central hub located close to Kishangarh and Pindwara, ensuring prompt delivery to all major Indian stone fabrication yards.
- Tiered B2B Wholesale Pricing: Substantial volume discounts for high-volume stone carving workshops, monument fabricators, and CNC tooling retail dealers.
- 100% GST Tax Invoice: Claim 18% Input Tax Credit (ITC) on every business order.
- Fast Pan-India Express Logistics: Door-to-door courier delivery via Delhivery, Blue Dart, and TCI Express.
Frequently Asked Questions (FAQs)
Q1. What does the code "DSZ12,6-60(160)" mean?
- DSZ: Patented composite brazed conical series with blue spiral flutes.
- 12: 12 mm shank diameter (fits ER20, ER25, or ER32 collets).
- 6: 6.0 mm tip cutting diameter.
- 60: 60 mm cutting flute length.
- (160): 160 mm overall tool length.
Q2. Why is the spindle speed limited to 18,000 RPM on Loxa tools?
Tools with lengths between 120mm and 230mm experience high centrifugal forces. Exceeding 18,000 RPM creates dynamic whip and vibration that breaks the cutter shank and damages spindle bearings.
Q3. Can Loxa CP series tools be used on granite?
Yes, for shallow slotting and profiling. However, for continuous deep granite pocketing and roughing, the sintered FP / FPC series or composite DSZ series is recommended due to their superior diamond bonding endurance.
Q4. Does Toolspana supply single pieces or full 5-piece packs?
Toolspana supplies both individual trial pieces and complete sealed 5-piece / 10-piece factory packs with tiered B2B wholesale pricing.
Order Genuine Loxa CNC Tools Today
Equip your CNC routers with genuine Loxa diamond tools and experience faster cutting, mirror-smooth finishes, and zero shank breakage.
Wholesale, Bulk & B2B Inquiries
- Direct B2B Wholesale Desk: +91-9887836557
- Official Email: support@toolspana.com
- Central Headquarters: Hammer Tools Pvt. Ltd., National Highway, near Mateshwari Hotel, Chauraha, Kojra, Pindwara, Rajasthan - 307022, India.